Ana Sayfa Hakkımızda Ürünlerimiz Teknik Bilgi Kalite İletişim  
   
Malzeme
Malzemeler
Malzeme karşılaştırması
Tasarım
Basınç-Sıcaklık
Semboller
Markalama, Etiketler
Flanş yüzey işlemleri
Çelik Döküm vanalar için GELİŞİM tasarım özellikleri
Çelik döküm valflerde kaynak uçları B16.25
Yatak Detayları
Uçtan uca boyutlar
Test
Test ve kalite kontrol

 

Ürünlerimiz
Gate Valfler
Globe Valfler
Kelebek Valfler
Çek Valfler
Küre Valfler

 
Uçtan Uca Boyutlar

Sınıf 150 Sınıf 300 Sınıf 600 Sınıf 900 Sınıf 1500

 

SINIF 300

Nominal Valf Boyutu Flanged End (1/16 in. Raised Face) and Welding End Flanged and Welding End
Gate, Solid Wedge, Double Disc4, and Conduit
A&B		 Globe  and Lift Check A&B Angle
and Lift Check
D&E		 Swing Check
A&B		 Control2
A		 Ball
Long Pattern
A		 Short Pattern
A&B		 Long Pattern
B
1/2 5 1/2 6 3   7-1/2 5-1/2    
3/4 6 7 3-1/2   7-5/8 6    
1 6-1/25 8 4 8-1/2 7-3/4 6-1/2    
1-1/4 75 8-1/2 4-1/4 9   7    
1-1/2 7-1/2 9 4-1/2 9-1/2 9-1/4 7-1/2 7-1/2 7-1/2
2 8-1/2 10-1/2 5-1/4 10-1/2 10-1/2 8-1/2 8-1/2 8-1/2
2-1/2 9-1/2 11-1/2 5-3/4 11-1/2 11-1/2 9-1/2 9-1/2 9-1/2
3 11-1/8 12-1/2 6-1/4 12-1/2 12-1/2 11-1/8 11-1/8 11-1/8
3-1/2                
4 12 14 7 14 14-1/2 12 12 12
5 15 15-3/4 7-7/8 15-3/4        
6 15-7/8 17-1/2 8-3/4 17-1/2 18-5/8 15-7/8 15-7/8 18
8 16-1/2 22 11 21 22-3/8 19-3/4 16-1/2 20-1/2
10 18 24-1/2 12-1/4 24-1/2   22-3/8 18 22
12 19-3/4 28 14 28   25-1/2 19-3/4 25
14 30     33   30 22-1/2 30
16 33     34   33 24 33
18 36     38-1/2 36 36 26 36
20 39     40   39 28 39
22 43     44   43   43
24 45     53   45 32 45
26 49     53   49   49
28 53     59   53   53
30 55     62-3/4   55   55
32 60         60   60
34 64         64   64
36 68     82   68   68




SINIF 600

  Flanged End (1/4 in. Raised Face) and Welding End
Nominal Valve Size Solid Wedge, Double Disc4 and Conduit
A&B		 Short Pattern3
B		   Globe, Lift Check, and Swing Check Regular Pattern
A&B		 Globe, Lift Check, and Swing Check Short Pattern3
B		 Angle and Lift Check Regular Pattern
D&E		 Angle and Lift Check Short Pattern3
E		 Control2
A 		Ball Long Pattern
A&B
1/2 6-1/25   6-1/2   3-1/4   8 6-1/2
3/4 7-1/25   7-1/2   3-3/4   8-1/8 7-1/2
1 8-1/2 5-1/4 8-1/2 5-1/4 4-1/4   8-1/4 8-1/2
1-1/4 9 5-3/4 9 5-3/4 4-1/2     9
1-1/2 9-1/2 6 9-1/2 6 4-3/4   9-7/8 9-1/2
2 11-1/2 7 11-1/2 7 5-3/4 4-1/4 11-1/4 11-1/2
2-1/2 13 8-1/2 13 8-1/2 6-1/2 5 12-1/4 13
3 14 10 14 10 7 6 13-1/4 14
3-1/2                
4 17 12 17 12 8-1/2 7 15-1/2 17
5 20 15 20 15 10 8-1/2    
6 22 18 22 18 11 10 20 22
8 26 23 26 23 13   24 26
10 31 28 31 28 15-1/2     31
12 33 32 33 32 16-1/2     33
14 35 35 359         35
16 39 39 399         39
18 43 43 439         43
20 47 47 479         47
22 51   519         51
24 55 55 559         55
26 57   579         57
28 61   639         61
30 65   659         65
32 706             70
34 766             76
36 826   829         82

 


SINIF 900

Nominal Valve Size Flanged End (1/4 in. Raised Face) and Welding End
Gate Globe, Lift Check, and Swing Check Regular Pattern
A&B		 Globe, Lift Check, and Swing Check Short Pattern3
B		 Angle and Lift Check Regular Pattern
D&E		 Angle and Lift Check Short Pattern3
E

Ball

Long Pattern
A&B
Solid Wedge, Double Disc4 and Conduit
A&B		 Short Pattern3>
B
3/410     9   4-1/2    
110 105 5-1/2 10   5   10
1-1/410 115 6-1/2 11   5-1/2   11
1-1/210 125 7 12   6   12
210 14-1/2 8-1/2 14-1/2   7-1/4   14-1/2
2-1/210 16-1/2 10 16-1/2 10 8-1/4   16-1/2
3 15 12 15 12 7-1/2 6 15
3-1/2              
4 18 14 18 14 9 7 18
5 22 17 22 17 11 8-1/2  
6 24 20 24 20 12 10 24
8 29 26 29 26 14-1/2 13 29
10 33 31 33 31 16-1/2 15-1/2 33
12 38 36 38 36 19 18 38
14 40-1/2 39 40-1/2 39 20-1/4 19-1/2 40-1/2
16 44-1/2 43 44-1/29 43 26   44-1/2
18 48   489   29   48
20 52   529   32-1/2   52
22              
24 61   619   39   61


SINIF 1500

Nominal Valve Size Class 150 Steel
Flanged End (1/4 in. Raised Face) and Welding end
Gate Globe, Lift Check and Swing Check
A&B		 Swing Check Short Pattern3
B 		Angle
and Lift Check Regular Pattern
D&E
Solid Wedge, Double Disc,4 and Conduit
A & B 		Short Pattern3
B
1/2     8-1/28   4-1/4
3/4     9   4-1/2
1 105 5-1/2 10   5
1-1/4 115 6-1/2 11   5-1/2
1-1/2 125 7 12   6
2 14-1/2 8-1/2 14-1/2 8-1/2 7-1/4
2-1/2 16-1/2 10 16-1/2 10 8-1/4
3 18-1/2 12 18-1/2 12 9-1/4
3-1/2          
4 21-1/2 16 21-1/2 16 10-3/4
5 26-1/2 19 26-1/2 19 13-1/4
6 27-3/4 22 27-3/4 22 13-7/8
8 32-3/4 28 32-3/4 28 16-3/8
10 39 34 39 34 19-1/2
12 44-1/2 39 44-1/2 39 22-1/4
14 49-1/2 42 49-1/2 42 24-3/4
16 54-1/2 47 54-1/29 47  
18 60-1/2 53 60-1/29    
20 65-1/2 58 65-1/29    
22          
24 76-1/2   76-1/29    

 

 

SINIF 150

Nominal Valve Size
 Flanged End (1/16 in. Raised Face) and Welding End Flanged End Welding End
Gate
 Globe, Lift Check, and Swing Check A&B Angle    and Lift Check
D&E		 Y-Globe and Y-Swing Check
A&B		 Control2
A
Ball
Double Disc A Conduit A Solid Wedge Double Disc and Conduit
B		 Long Pattern
A		 Short Pattern
A		 Long Pattern
B		 Short Pattern
B
1/4 4   4 4 2            
3/8 4   4 4 2            
1/2 4-1/4   4-1/4 4-1/4 2-1/4 5-1/2   4-1/4 4-1/4    
3/4 4-5/8   4-5/8 4-5/8 2-1/2 6   4-5/8 4-5/8    
1 5   5 5 2-3/4 6-1/2 7-1/4 5 5    
1-1/4 5-1/2   5-1/2 5-1/2 3 7-1/4   5-1/2 5-1/2    
1-1/2 6-1/2   6-1/2 6-1/2 3-1/4 8 8-3/4 6-1/2 6-1/2 7-1/2 7-1/2
2 7 7 8-1/2 8 4 9 10 7 7 8-1/2 8-1/2
2-1/2 7-1/2 7-1/2 9-1/2 8-1/2 4-1/4 11 10-7/8 7-1/2 7-1/2 9-1/2 9-1/2
3 8 8 11-1/8 9-1/2 4-3/4 12-1/2 11-3/4 8 8 11-1/8 11-1/8
3-1/2                      
4 9 9 12 11-1/2 5-3/4 14-1/2 13-7/8 9 9 12 12
5 10   15 1411 7            
6 10-1/2 10-1/2 15-7/8 1611 8 18-1/2 17-3/4 15-1/2 10-1/2 18 15-7/8
8 11-1/2 11-1/2 16-1/2 19-1/2 9-3/4 23-1/2 21-3/8 18 11-1/2 20-1/2 16-1/2
10 13 13 18 24-1/2 12-1/4 26-1/2   21 13 22 18
12 14 14 19-3/4 27-1/2 13-3/4 30-1/2   24 14 25 19-3/4
14 15 15 22-1/2 31 15-1/2     27 15 30 22-1/2
16 16 16 24 3612 18     30 16 33 24
18 17 17 26 38-1/29       34   36 26
20 18 18 28 38-1/29       36   39 28
22     30 429           43  
24 20 20 32 519       42   45 32
26 22 22 346 519           49  
28 24 24 366 579           53  
30 24 26 366 609           55  
32   28 386             60  
34   30 406             64  
36 28 32 406 779           68  

 

1. API Standards 6D and 600 conform to the dimensions shown for corresponding sizes, valve type, and flange class or welding end.
2. Instrument Society of America Recommended Practice ISA-RP4.1 face-to-face conform to these dimensions
3. These dimensions apply to pressure seal or flangeless bonnet valves. They may be applied at the manufacturer's option to valves with flanged bonnets.
4. API Standard 6D: Flanged and Welding End Double Disc Gate Valves.
5. Solid Wedge only.
6. Double Disc and Conduit only.
7. Class 150/Corrosion Resistant valves, covered by MSS SP-42 have plain flat-faced flanges.
8. Globe and Lift check only.
9. Swing Check only.
10. The connecting end flanges for Class 900 valves 2-1/2" and smaller are identical with those of Class 1500 valves. The face-to-face dimensions for all Class 900 valves 2-1/2" and smaller are identical with those of Class 1500 valves.
11. Globe and Horizontal Lift Check only. The face-to -face and end-to-end dimension for Class 150 Steel Flanged and Buttwelding End Swing check Valves in 5" size is 13" and in 6" size is 14".
12. Globe and Horizontal Lift check only. The face-to-face and end-to-end dimension for Class 150 Steel Flanged and Buttwelding End Swing Check Valves in 16" size is 34".
13. Dimensions shown are in inches.

 
  Gelişim Valf ve Makina Sanayi Ticaret Limited Şirketi
   e-posta: bilgi@gelisimvana.com  
 

Büro:
PERPA, B Blok, Kat: 9, No: 1348, Okmeydanı
80270 Şişli, İstanbul
Tel: (0212) 222 18 93, Faks: (0212) 222 03 56

   Fabrika:
Mescid Mah. Atatürk Cad. Birmes Sanayi Sitesi,
D3 Blok Orhanlı 34956 Tuzla / İstanbul
Tel: (0216) 394 05 80, Faks: (0216) 394 08 42